Electrician in Takapuna

Ballard Services is a family-owned Takapuna electrician based ten minutes away in Devonport, a straight run up Lake Road. Switchboard upgrades, electrical inspections and COVs, EV charging, fault finding, lighting and commercial work, quoted fixed with a drawing inside two working days, and certified in-house by our own Registered Electrical Inspector. Monday to Friday, 7am to 5pm, on 09 445 8857.

Updated 15 September 2026

A Takapuna electrician ten minutes up Lake Road

Most electricians who advertise in Takapuna are dispatching from Albany, Glenfield, or the other side of the bridge. We are not. The van leaves Devonport, runs up Lake Road past Belmont and Hauraki Corner, and is on Hurstmere Road inside ten minutes outside school traffic. That is the whole of our travel story, and it is why a Takapuna job gets the same response as one on our own street.

Two things make us different from the firms above and below us on that list. The first is that our Registered Electrical Inspector is in-house, so the person who signs your work off is the person who did it, and inspection reports and Certificates of Verification are issued by us rather than booked through a third party. The second is the quote: a fixed price and a drawing inside two working days, not an hourly rate and an estimate, and a 12 month workmanship guarantee on every job.

Takapuna homes and buildings we work on

Takapuna’s building stock is the most mixed on the Shore. Apartment towers around Anzac Street and Northcroft Street sit a block from the beachfront homes on The Promenade, with a band of 1960s and 70s unit blocks between them along Killarney Street and the lake end of Hurstmere Road that are quietly running switchboards from their construction era. Each type generates its own electrical work, and we do all of it from ten minutes down the road.

For apartments and units, the routine work is compliance: switchboard reports for body corporates, inspection reports for landlords and property managers, and the remedial upgrades that follow. Older unit boards with rewireable fuses and no RCD protection are common, and they are exactly the boards insurers are starting to ask questions about before renewing.

Along the beach, on the Lake Pupuke frontages and in the renovated streets between, the work runs premium: renovation electrical, architectural and garden lighting, solar on the bigger roofs, and EV charging. In shared parking a charger is a design problem involving metering, load management and body corporate sign-off, which suits a firm whose specialty is awkward installs. Hurstmere Road, The Strand and the Barrys Point Road workshops add fit-out, maintenance and compliance work for shops, hospitality and light industry on top.

Electrical services in Takapuna

Switchboard upgrades in Takapuna

The single most common job we do in Takapuna. Unit and townhouse boards from the 1960s and 70s brought to current standards with RCD protection, labelled, tested and recorded, then certified by our own inspector. Quoted fixed after a look at the board, and if an EV charger or a heat pump is the reason for the upgrade, we price both as one job. Switchboard upgrades.

Electrical inspections and COVs in Takapuna

Certificates of Verification for sales and settlements, switchboard and insurance reports for body corporates and landlords, and Records of Inspection for work that needs an inspector’s signature, all issued in-house. For agents and property managers working to a settlement date, an inspector who is ten minutes away rather than a week away is the difference between a condition met and a condition missed. Inspections and reports.

EV charger installation in Takapuna

Standalone garages are straightforward: board checked, dedicated circuit, 7.4 kW smart charger, certified. Shared basements are not, and we do those too, from the metering and load-management design through the body corporate case to the install. Typical Auckland pricing and what moves it are in our North Shore cost guide. EV charger installation.

Fault finding in Takapuna

Tripping RCDs, dead circuits, flickering lights and the intermittent faults older wiring produces. We diagnose before we replace anything, tell you what we found and what the fix costs, then fix it properly. Fault finding and repair.

Lighting for Takapuna homes

Layered LED interiors for renovated homes and coastal-rated exterior and garden lighting for the beach and lake frontages, where salt air works on every fitting. Specified for the house, not lifted from a catalogue. Architectural and outdoor lighting.

Commercial electrical on the Takapuna strip

Fit-outs, maintenance and compliance for shops and hospitality on Hurstmere Road and The Strand, offices around Anzac Street and Smales Farm, and the workshops on Barrys Point Road, including commercial switchboard reports issued in-house. Residential and commercial electrical.

An electrician terminating conductors in a new labelled switchboard

Old boards, new loads, one fixed price

What electrical work costs in Takapuna

Takapuna searches for an electrician are mostly searches for a price, so here is how ours works. Planned work is quoted fixed, with a drawing, inside two working days: one number covering the visit, the materials, the labour and the certification, with no hourly meter and no discovery invoices. Faults are the exception, because nobody can price a fault before finding it. Diagnosis is charged as part of the job, and you hear what we found and what the fix costs before we do it.

Typical Takapuna jobWhat decides the priceHow we quote it
EV charger on a dedicated circuitCable run from board to car, board capacity, the charger itself ($800 to $2,500 for a 7.4 kW smart unit)Fixed. Typically $1,500 to $3,000 + GST installed on the Auckland market. Full breakdown in the cost guide
Switchboard upgrade in a 1960s or 70s unitNumber of circuits, condition of the mains, whether the meter position has to moveFixed after a look at the board. Where a board has to be upgraded before a charger or heat pump, allow $1,500 to $4,000
Certificate of Verification or inspection reportSize of the property and what the report has to coverFixed per property, agreed before we book it, issued in-house
Body corporate switchboard reportNumber of boards and units, access to risers and meter roomsFixed per building, with the remedial work quoted separately so the committee sees both numbers
Fault findingHow intermittent the fault is and how much of the circuit has to be tracedDiagnosis charged as part of the job, fix priced before it is done
Renovation electrical or lightingCircuits, fittings, and whether the board needs work to carry itFixed, from a drawing, so the builder and the tiler know where everything lands

The fastest way to a real number is the job planner: ten questions, about two minutes, and we know enough to price it. Or send the address and roughly what you are after through the quote form.

Every job in Takapuna is certified in-house by our own Registered Electrical Inspector. The person who signs the work off is the person responsible for it, and the Certificate of Compliance is issued by us, not by someone who never saw the job.

Body corporates, landlords and property managers

A large share of Takapuna’s housing is managed rather than owner-occupied, and managed property runs on paperwork. We issue switchboard reports for body corporate committees, inspection and insurance reports for landlords, and Certificates of Verification for sales, and because the inspector and the electrician are the same crew, the remedial work follows the report without a second contractor and a second round of quotes. Property managers get one number to call for both, and one invoice at the end.

For shared-basement EV charging we prepare the technical case the committee needs to vote on: the metering arrangement, the load management that stops three chargers tripping the building, and the cable routes, before anything is mounted on a wall.

Why Takapuna calls a Devonport electrician

10min

Devonport to Takapuna up Lake Road, outside school traffic. No bridge, no motorway, no travel-time meter

2days

Fixed price and a drawing inside two working days of your enquiry

12months

Workmanship guarantee on every job, certified by our own inspector

26years

In the trade, servicing the peninsula and the Shore since 2010

Takapuna electrician questions

How much does an electrician cost in Takapuna?

Planned work is quoted fixed, with a drawing, inside two working days, so the number you see is the number you pay. As a guide, the ranges we publish for the Auckland market are $1,500 to $3,000 plus GST to install an EV charger on a dedicated circuit, and $1,500 to $4,000 where a switchboard needs upgrading first. Faults are diagnosed before anything is replaced, and you hear what the fix costs before we do it. See the cost guide.

What is your minimum charge or call-out fee in Takapuna?

For planned work there is no call-out-plus-hourly meter: you get one fixed price that covers the visit, the work and the certification. For a fault, diagnosis is charged as part of the job, and we tell you what we found and what the fix costs before doing it, so a fault visit never turns into a sequence of replaced parts.

How quickly can you get to Takapuna?

Takapuna is a straight run up Lake Road from our Devonport base, about ten minutes outside school traffic, so we are usually on site within the hour of a scheduled slot. You are not paying for an electrician to cross the bridge.

Do you charge travel time for Takapuna jobs?

Our quotes are fixed and Takapuna is ten minutes from base, so there is no travel-time line to watch. The price covers the whole job, wherever in Takapuna it is.

Can you install EV chargers in Takapuna apartment buildings?

Yes. Shared basements and body corporate approval make apartment charging a design job rather than a plug-in job: metering, load management and cable routes all have to be agreed before anything goes on a wall. We handle the technical case for the body corporate as part of the work.

Do you do landlord and body corporate compliance work in Takapuna?

Yes. Switchboard reports, inspection reports and remedial work for rental units and apartment buildings, issued in-house by our own Registered Electrical Inspector. Property managers get one contact for the report and the fix.

Do you do commercial electrical work in Takapuna?

Yes. Fit-outs, maintenance and compliance work for shops and hospitality on Hurstmere Road and The Strand, offices around Anzac Street and Smales Farm, and the workshops on Barrys Point Road, including commercial switchboard reports issued by our in-house Registered Electrical Inspector.

Can I replace a light switch or power point myself in New Zealand?

In your own home, and only your own home, the regulations let you replace a like-for-like switch, socket or light fitting on an existing circuit with the power off, and the result is your responsibility. Anything on the switchboard, any new wiring or circuit, and any work in a rental property needs a licensed electrician. If a switch is warm, discoloured or crackling, stop and call us: that is a fault, not a swap.

How many power points can you have on one circuit in New Zealand?

The wiring rules do not set a hard number. They set the cable size and the protection for the circuit, and the count follows from the load you expect on it. A modern kitchen or a home office with a heater is usually the argument for a new dedicated circuit rather than another outlet on an old one, which is exactly what we assess when we quote.

Do you work weekends or after hours in Takapuna?

Our hours are Monday to Friday, 7am to 5pm. For an urgent fault inside those hours call 021 244 5950 and if we can get to you the same day, we will. After hours, call 111 for a life-safety emergency or your lines company for a network outage.

Tell us about the Takapuna job

Ten questions, about two minutes, and we know enough to price it. Or just send us a message. Either way you get a fixed price and a drawing inside two working days, not a range and a maybe.

Ballard Services Limited